What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 18.06.2025 03:37

What is lightning?
Barnstars:
[old diagram got deleted by accident]
but I think this circuit , shows a few more pieces.
This is where this question deviates from being a 'generic' question, and becomes more specific.
It also is a device that limits the change in current flow.
Were knights’ lances practical weapons, or were they just for sports?
Edit 2024–10.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
The other is “what does a “fuse” do?”
🌿🌻Why are Meghan and Harry not treated like royalty in the United States anymore?
Upvotes:
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
The bolt then partially travels down the line to your home.
What are the best ways to treat seasonal allergies?
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
nine
Prime Day is back July 8-11, with double the days and millions of deals - About Amazon
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
I post the exact comment here.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Do any other guys like to eat cum of another man from their wife's pussy?
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
A circuit breaker is similar, but is resettable.
It seems Mohan does not understand the difference between a comment and an Answer.
What did Chandrashekhar Azad say about Hinduism during a podcast?
In schematic diagrams this is the symbol for a fuse:
So, the voltage could go up to 500 volts, and the fuse will not open up.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
2024–10–16 [ OO OLAOYE OYEBODE ]
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Here is a simplified AC power diagram.
How do I become an intelligent man?
There are three different concepts here that are getting confused.
eight
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
the problem then depends on "how fast does the fuse operate?".
A fuse is a non-resetable over current circuit protector.
but this device (an Inductor) … impedes the rapid changes in the current.
This is where the MOV conducts again, and dissipated the energy.
This device then solves the entire problem.
This is 'the assistant's answer'
At one ohm, the resistor has a maximum of 1 watt power.
(Dc diagram shown, AC is similar).
One is “what exactly is in a ‘surge protector’ ? ”
so, what happens?
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
One
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
The third is lightning and “how it gets conducted into a home.”
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
He then describes Rainy Season and Lightning.
what exactly is a ‘surge’ protector?
This one hit behind the barn.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
But… the neutral is now “floating” because of the 1 ohm resistance.
a photo is worth a thousand words.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
These devices are installed between the “hot” and “neutral” and protective ground.
2024–10–14 [Omar Gharbi Omar Gharbi ]
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
First Sentence:
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
But it can get overloaded, and no longer works.
What does a fuse do?
At least they know the answer if they wanted it.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
These are simplified answers to the original question, and does not change anything I wrote above.
2024–10–10[John johnson John Johnson ]
There are two important concepts here.
The MOV will conduct when the voltage exceeds 50% of line voltage.
For this case there are devices called Metal oxide varistors (MOV).
He then asserts :
Now when you have a certain ac resistance, then a current flows in a loop.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
He then describes the function of a fuse.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
An AC voltage/ current source, and an ac inductive load.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
[image of Common-mode choke]
Because the load is inductive, the current lags the voltage.(by a bit).
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].